OEM TOYOTA MATRIX PONTIAC VIBE KEYLESS REMOTE FOB TRANSMITTER GQ43VT14T W/ PANIC

Description

SFfobsinc.
:FOR SALE:
ONE GOOD factory TOYOTA
OEM ORIGINAL
keyless entry remote FOB
REMOTE HAS BEEN TESTED AND IS IN 100% WORKING ORDER
FCC ID: GQ43VT14T
CAN: 1470 102 849
4 BUTTON REMOTE
LOCK, UNLOCK, 'HATCH' OR 'HATCH/GLASS'
WITH PANIC BUTTON
:WORKS WITH:
2003 2004 2005 2006 2007 2008
TOYOTA
MATRIX
PONTIAC VIBE
NOTE: YOU WILL RECEIVE ONE OF THE TWO REMOTES PICTURED ABOVE. THESE REMOTES HAVE THE SAME FUNCTION FOR THE HATCH/GLASS.. TOYOTA USED BOTH REMOTES FOR BOTH VEHICLES.
ALL TRIM LEVELS EQUIPPED WITH FACTORY KEYLESS ENTRY
PLEASE BE SURE TO MATCH FCC ID AND PART NUMBERS WITH A CURRENT REMOTE. IF YOU ARE UNSURE OF COMPATIBILITY CHECK WITH YOUR LOCAL DEALER BEFORE PURCHASING.
MAY WORK WITH OTHER MODELS AND YEARS.
:PROGRAMMING:
FREE GENERAL PROGRAM INSTRUCTIONS INCLUDED!!
SEE BOTTOM OF PAGE
THE REMOTE CAN ALSO BE TAKEN TO YOUR LOCAL DEALER OR LOCKSMITH TO BE PROGRAMMED OR MAY BE RESEARCHED ONLINE.
:PAYMENT:
PLEASE MAKE ARRANGEMENTS TO PAY FOR THE ITEM WITHIN 2 DAYS OF AUCTIONS END
:WARRANTY:
ALL TRANSMITTERS CARRY A STANDARD 30 DAY WARRANTY.
WARRANTY'S WILL COME IN THE FORM OF A REFUND OR REPLACEMENT.
:SHIPPING:
ALL ITEMS ARE SHIPPED WITHIN 1 BUSINESS DAYS OF RECEIPT OF PAYMENT.
ITEMS WILL BE SHIPPED USPS FIRST CLASS MAIL WITH DELIVERY CONFIRMATION.
ANY QUESTIONS PLEASE EMAIL THROUGH EBAY
THANK YOU
Obtain all remote transmitters for this vehicle.
1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.
2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.
3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.
4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.
6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.